KOREA · PROCESS EQUIPMENT

Mixing Vessels and Agitated Process Equipment for Korea

Korean process plants often specify agitated vessels as individual engineered units, where agitator geometry, jacket design and cleaning access matter as much as motor power.

Korean process plants often specify agitated vessels as individual engineered units, where agitator geometry, jacket design and cleaning access matter as much as motor power.

For Korea’s chemical and coatings producers, POLYC supplies agitated mixing and tinting vessels, low-speed mixers, concentric and multi-shaft mixers, and vacuum dispersing machines, selected by viscosity, batch volume and cleaning requirements.

Basket Mill

Batch grinding and dispersion in one vessel, ideal for Korean paint and ink makers with frequent colour changes.
View Product →

Pin Type Bead Mill

Horizontal bead mill for fine grinding down to 50 nm, suited to automotive and can coatings.
View Product →

Single Shaft High Speed Disperser

Pigment wetting and pre-mixing for paints, inks and coatings, 50-5,000 L.
View Product →

Planetary Mixer

High-shear planetary mixer for high-viscosity pastes, adhesives and sealants.
View Product →

Ink Production Line

Integrated ink line from pre-dispersion to filling, configured to your formulation.
View Product →

Paintcoating Production Line

Complete paint and coating line from pre-dispersion to filling, scaled to capacity.
View Product →

Grinding Media Zirconia Beads

High-density zirconia media for efficient, low-contamination milling.
View Product →

Ids Inline Dispersion Machine

Inline dispersion for continuous, repeatable fineness on coating and ink streams.
View Product →

Why POLYC MACHINE for Korean Process Plants

Korean paint, coating, ink and specialty-chemical plants run tight process control and expect documented performance and fast local response. POLYC supplies mixing vessels, agitators, dispersers, bead mills and complete lines sized to local viscosity, fineness and throughput, built for Korea's 60 Hz grid.

Trials with your own formulation

We run dispersion and grinding trials on your actual coating, ink or emulsion base before order confirmation, so fineness, colour acceptance and batch-to-batch consistency are verified on your product, not a generic sample.

Documentation in Korean and English

Manuals, P&I diagrams, spare-parts lists and certification packs are supplied in English as standard, with Korean translation for operation and maintenance teams and KC files.

Electrical configuration for Korea (60 Hz)

Korea runs on a 60 Hz grid (not 50 Hz like China). Machines are built for 220 V / 380-440 V three-phase 60 Hz supply, with drives and motors specified for 60 Hz operation - or 50/60 Hz-capable where the application allows - to avoid the overheating and premature failure that a 50 Hz machine would suffer on a 60 Hz line. IEC/CE electrical safety is applied throughout, and panels are prepared for KC review.

Installed reference in Asia

POLYC equipment runs in coatings, ink and adhesive plants across Asia, giving Korean buyers a regional service and spare-parts base to draw on.

Local-language and remote support

Pre-shipment inspection, commissioning guidance and remote troubleshooting are provided in Korean and English, coordinated with your local agent or engineering team.

Plan Your Korea Production Line

Tell us your product (coating, ink, emulsion or adhesive system), target fineness, batch volume and mixing duty. We return a sized agitator, disperser, mill and mixer configuration with a layout and lead-time estimate.

Request a quotation   Browse the equipment range

Request a Quote →

Agitated Vessels in Korean Process Plants

An agitated vessel is specified by what it must do to the batch: keep solids suspended, wet powder into liquid, hold temperature, or de-aerate a paste. Motor power alone does not describe that duty — agitator type, blade geometry, baffles and jacket design determine whether the whole volume moves.

Typical units include the mixing and tinting kettle, low-speed mixing vessel and lacquer mixer.

Selecting an Agitator by Viscosity

Viscosity / behaviourAgitator approachTypical unit
Low, pumpable liquidHigh-speed disc dispersionHigh-speed disperser
Medium, solids need suspendingLow-speed anchor or paddle with bafflesLow-speed mixing vessel
High, non-flowing pasteWall scraping plus a second dispersion shaftConcentric double-shaft mixer
Very high solids / puttyButterfly or three-shaft agitationButterfly double-shaft / three-shaft mixer

The high-viscosity mixer guide gives the torque and speed considerations behind each choice.

Jacketed, Heated and Vacuum Vessels

Where a process needs temperature control, a jacketed vessel with an electrical heating reactor or a resin reactor is used. For products that trap air, a vacuum dispersing machine removes it before filling.

Multi-Shaft and Concentric Configurations

A concentric double-shaft mixer puts a slow wall scraper and a fast disperser on one axis; a multi-shaft dispersing kettle separates them. The choice depends on how sticky the batch is and how much shear is needed.

Cleaning, Changeover and Materials

For plants running many formulations, cleanability decides throughput as much as mixing time. Wetted-part material, seal type, vessel finish and access for washing are confirmed at the design stage. Contact materials follow the product chemistry, not a default catalogue specification.

From Enquiry to Commissioning

Start with material, viscosity, target homogeneity or fineness, batch volume and utility conditions. The RFQ checklist lists the full data set; the turnkey project process describes design, testing, installation and acceptance.

Check applications and limitations if the duty is outside wet mixing or dispersion.

Frequently Asked Questions

How do I choose an agitator for my vessel?

From viscosity and flow behaviour: pumpable liquids use high-speed discs, non-flowing pastes need wall scraping and a second shaft.

Do you supply jacketed or heated vessels?

Yes, jacketed vessels, heating reactors and resin reactors are available where temperature control is required.

Can a vessel be supplied as a single unit?

Yes. Individual vessels and mixers can be quoted separately from a complete line.

Is vacuum de-aeration available?

Yes, a vacuum dispersing machine is used where entrapped air affects the finished product.

What data is needed for a quotation?

Material, viscosity, batch volume, target result, utility conditions and, for a line, capacity and layout.

Do you publish prices?

No. Prices are provided in a project-specific proposal.

Related Equipment

Explore the dispersers, mills, mixers and production lines referenced on this page:

  • Basket Mill - Batch grinding and dispersion in a single vessel, ideal for frequent colour changes in paints and inks.
  • Pin Type Bead Mill - Horizontal bead mill for fine grinding down to 50 nm, suitable for automotive coatings and inks.
  • Planetary Mixer - High-shear planetary mixer for high-viscosity pastes, adhesives and sealant compounds.
  • Single Shaft High Speed Disperser - Single-shaft high-speed disperser for pigment wetting and pre-mixing in paints, inks and coatings, 50-5,000 L.
  • Ink Production Line - Integrated ink manufacturing line from pre-dispersion to filling, configured to your formulation.
  • Paint/Coating Production Line - Complete paint and coating production line from pre-dispersion to filling, scaled to your capacity.
  • Grinding Media Zirconia Beads - High-density zirconia grinding media for efficient, low-contamination milling.

Korea's Coatings, Ink and Specialty-Chemical Market

South Korea's paint, coating, printing-ink and specialty-chemical sector is driven by world-class automotive, semiconductor, shipbuilding, electronics and cosmetics industries, making it one of Asia's most demanding outlets for mixing, dispersion and grinding equipment.

Economic and industrial profile

Korea combines heavy industry (Ulsan petrochemicals, shipbuilding on the south-east coast), advanced automotive (the Seoul-Chungcheong and Gyeongbuk corridors), semiconductors and displays (Hwaseong, Pyeongtaek, Gumi), and a large cosmetics and personal-care sector. All of these pull demand for automotive and ship coatings, semiconductor and display wet chemicals, architectural paints, packaging inks and high-purity emulsions. Industrial activity clusters around the Seoul capital area (Incheon, Gyeonggi), Busan, Ulsan, Daegu and Gwangju.

Target sectors

Automotive and ship coatings, architectural and decorative paints, flexible-packaging and label inks, cosmetics and personal-care emulsions, adhesives/sealants, and specialty and electronic chemicals. Each favours different fineness, viscosity and cleanliness profiles, so the equipment mix shifts by segment.

Manufacturing landscape and demand

Both Korean-owned conglomerates and multinational formulators operate local plants with high automation and strict SOPs. Demand is for precise, well-documented, quick-changeover lines - which favours high-shear dispersers, agitators, planetary mixers, bead mills and inline dispersion over fixed large lines.

Competitive landscape and opportunity

Imported European, Japanese and domestic Korean equipment competes on brand and local service; the opening is for capable, fairly priced dispersers, mills and mixers with fast response, documented performance and Korea-compatible 60 Hz electricals and Korean documentation.

Where demand concentrates

Capital-area demand (Seoul, Incheon, Gyeonggi) is served via Incheon; south-east demand (Ulsan, Busan, Daegu) via Busan and Ulsan; south-west via Gwangyang. Port choice follows the plant's region to cut inland haul.

Importing Process Equipment into Korea

This is general guidance for planning landed cost and lead time; exact duty, control status and certification always follow the Korean HS code, the Korea-China FTA text and current KC regulations. Confirm with a licensed Korean customs broker and the importer of record before shipment.

Tariff framework

Mixing, kneading, grinding and stirring machines are generally classified under HS 8479. Korea's MFN import duty on this machinery is about 8%, but China-origin machines enter at 0% preferential duty under the Korea-China Free Trade Agreement (Korea-China FTA, CKFTA) with a valid Certificate of Origin. Note that the RCEP rate for China-origin goods on this heading is commonly higher than the CKFTA rate, so the Korea-China FTA is usually the better route to claim 0%. Electrical heating items under HS 8419 are assessed on their own HS line.

Certificate of Origin (Korea-China FTA)

The 0% preferential rate requires a valid Certificate of Origin issued under the Korea-China FTA. The form must be accurate before the vessel departs; errors are the most common cause of clearance delay on this lane.

KC conformity (KC Mark)

Korea's KC Mark, administered by KATS (Korean Agency for Technology and Standards) under the Electrical Appliances Safety Control Act, applies to regulated electrical and electronic products. A machine's main body may be outside the scope, but its electrical components, panels, motors and control items may be regulated and require KC certification (often with Korean-language manuals and labels). An overseas manufacturer must appoint a Korean authorized representative or importer to handle KC. CE, CB or IEC reports support the file but do not replace KC where the component is controlled. Korea uses 220 V / 60 Hz with C-type plugs.

Customs clearance

Imports are declared to the Korea Customs Service (관세청). The importer of record must be a registered Korean entity with a valid business registration number shown on all documents; a foreign supplier without local presence appoints a Korean importer of record and customs broker. Korea Customs is known for strict document review, so HS codes at the 10-digit level and exact cargo descriptions matter.

Documents checklist

Commercial invoice, packing list, bill of lading, Certificate of Origin (if claiming CKFTA preference), KC certificates where applicable, technical documentation, and Korean or English labels. Wooden packaging must carry ISPM-15 treatment marking.

Logistics and Delivery to Korea

Korea is China's closest major ocean market - Busan is barely two days by sea from Shanghai - so transit is short and frequency is very high; documentary accuracy and KC readiness dominate the landed cost more than ocean freight. Figures below are typical ranges from forwarders; confirm space and rates with your freight forwarder at booking.

Main seaports

Busan is Korea's largest container gateway and a global transhipment hub on the south-east coast. Incheon serves the Seoul capital area (about 40 km from Seoul) on the north-west. Gwangyang (south-west) and Ulsan (petrochemical/industrial) handle specialised and bulk cargo. Most general cargo for Korean buyers moves through Busan or Incheon.

Transit times from Shanghai

Shanghai to Busan is typically 2-3 days; to Incheon about 3-4 days (port to port, FCL). Northern Chinese origins (Qingdao, Tianjin, Dalian) are even shorter to Incheon. LCL adds consolidation and deconsolidation time. Korea is one of the shortest ocean legs from China.

Air freight

Incheon International Airport (ICN) receives air cargo from China in about 1-2 days - used for urgent spares and high-value components. Express couriers complete door-to-door in 2-4 days.

Inland trucking

From Busan or Incheon, trucking reaches Seoul, Incheon and surrounding industrial zones in hours to a day. Same-day delivery to the Seoul metro from Busan is possible for FCL released promptly. Choos the port closest to the buyer's region to cut inland haul.

Packaging and ISPM-15

All wooden packaging from China must be ISPM-15 treated and marked; non-compliant pallets are rejected or quarantined. Standard 1100x1100 mm or ISO 1200x1000 mm pallets are accepted.

Cost structure

On a 2-4 day run, ocean freight is a small share of landed cost; terminal handling, destination charges, CKFTA duty (0% with CoO, else 8% MFN), VAT and inland delivery matter more. Quote ocean, origin charges, destination charges, duty, VAT and inland delivery as separate lines.

Recommended route by destination

Seoul capital area: Incheon. South-east (Ulsan, Busan, Daegu): Busan or Ulsan. South-west: Gwangyang. Match the port to the region to cut inland haul.

Local Support and Service in Korea

POLYC backs mixing, dispersion and grinding lines with documentation, commissioning and after-sales support sized for Korean process plants.

Warranty coverage

Equipment is covered by POLYC's standard three-year limited warranty on manufacturing defects, with wear parts and consumables handled under a separate schedule agreed at order.

Technical support

Remote troubleshooting and process advice are available in Korean and English, with local-agent coordination for operation and maintenance teams.

Field service and commissioning

Installation supervision, alignment, electrical connection and commissioning can be guided remotely or supported on-site where a local agent is engaged, ensuring the line reaches design throughput on a 60 Hz supply.

Spare parts supply

Key spares - agitator shafts, seals, disperser shafts, bead-mill rotors/stators, grinding media and control components - are stocked and shipped from the regional supply base to keep downtime short.

Training

Operator and maintenance training covers safe operation, cleaning between colour changes, fineness control and routine service, supplied in Korean and English.

Regional experience

An installed base across Asia means Korean buyers draw on shared commissioning know-how, reference formulations and a responsive spare-parts pipeline.

Documentation and language

Manuals, P&I diagrams, spare-parts lists and certificates are provided in English, with Korean translation available for site use and KC files.

Get a Quote →WhatsApp
Chat on WhatsApp