SOLUTIONS BY INDUSTRY

Process Equipment Solutions by Industry

Industry process solutions from POLYC MACHINE: coatings, inks, pharmaceuticals, food, fine chemicals and mineral processing equipment for each route.

POLYC MACHINE supplies wet grinding, dispersion, mixing and filling equipment for six industrial process routes. Each solution page covers the typical production steps, the equipment that carries them, and the constraints that decide machine sizing.

A process solution is an equipment route matched to one product family — dispersion, milling, mixing and filling sized to your material, viscosity and target fineness, not a boxed bundle of machines.

Request a solution quote → Compare equipment

What a process solution actually is

A process solution is an equipment route matched to one product family — not a single machine and not a boxed bundle of kit. Two plants can use the same bead mill and run completely different processes, because the route around the machine decides the result: how the powder is wetted, how the grind is fed, how the batch is let down, and how the finished product is filtered and filled.

Almost every wet process on this site follows the same chain: premix and wetting → wet grinding → let-down and adjustment → filtration → filling. Each step sets the conditions for the next. A weak pre-dispersion caps what the mill can achieve; a mill that is oversized for the let-down tank creates a bottleneck downstream; filtration and filling sized to the wrong throughput undo the gains made in grinding. The slowest step, not the biggest machine, sets line capacity.

What changes between industries is the design pressure around that chain. Coatings and inks care about gloss, colour strength and colour-change time. Agrochemical suspension concentrates care about suspension stability and a tight particle-size distribution. Mineral processing cares about throughput and energy per tonne. Food and pharmaceutical work adds hygiene, containment, cleaning and validation. Solvent-based inks add explosion protection, and fine chemicals add corrosion and precision. The chain is the same; the engineering priorities are not.

So a solution is chosen by matching four things: the material and its behaviour, the viscosity and solids loading, the fineness you must hold, and the capacity and constraints of the plant. Once those are fixed, the equipment route and the level of automation follow. Routes can also be phased — start with dispersion and add grinding, let-down and filling as volume grows — provided utilities, space and controls are planned for expansion from the start.

Choose the route by industry and product

Industry / product Core process Typical equipment route What changes the design
Coatings (architectural, industrial, wood)Wet, grind, let down, filter, fillDisperser + bead mill + let-down tank + filter/fillerGloss and fineness target; colour-change time
Printing inks (offset, flexo, gravure, UV)Pigment wetting, fine grind, let downDisperser + bead mill (three-roll for paste inks)Colour strength, media size, solvent handling
Agrochemical SC formulationsPre-disperse, bead mill, blendDisperser + bead mill + blending + fillingSuspension stability and tight PSD
Industrial minerals (CaCO3, talc, kaolin)Slurry preparation and grindingLarge bead or attrition millsThroughput and energy per tonne
Food (sauces, dressings, beverages)Mix, homogenise, grindHygienic mixer + homogeniser or millHygienic design and cleaning
Pharmaceuticals (creams, suspensions)Contain, disperse, grindContained disperser + bead millContainment and validation
Construction materials (mortar, putty, plaster)Dry blending or paste mixingPowder blender or high-viscosity mixerDry vs paste route; dust control
Fine chemicals (pigments, dyes, catalysts)Disperse, mill, reactBead mill + disperser + reactorCorrosion resistance and precision

Related routes and equipment

SELECT YOUR MATERIAL

Choose the industry closest to your process

If your material and target fineness are not listed, the equipment route is usually the same: wet dispersing, controlled grinding, then mixing and filling. Contact the engineering team with your target capacity and fineness to confirm sizing.
Coatings

Coatings Manufacturing Equipment: Dispersion, Milling and Filling

Pigment wetting, wet grinding, letdown, filtration and filling for architectural, industrial, protective and wood coatings, from solvent-based alkyds to water-based acrylics and UV-curable systems.
View the Coatings solution →
Printing Inks

Ink Production Equipment: Dispersion, Milling and Filling for Printing Inks

Complete ink production lines for offset, flexographic, gravure, screen and UV inks, from high-speed dispersers and bead mills through to filtration and filling.
View the Printing Inks solution →
Pharmaceuticals

Pharmaceutical Processing Equipment: Containment, Cleaning and Validation

GMP-compatible wet grinding, dispersion and mixing for topical creams, ointments, suspensions, tablet coatings and API micronization, with 316L stainless steel and validated designs.
View the Pharmaceuticals solution →
Food & Beverage

Food Processing Equipment: Hygienic Design for Beverages, Sauces and Additives

EHEDG-compatible mixing, homogenizing and wet grinding for sauces, dressings, beverages, food colourants, flavour emulsions and nutritional additives.
View the Food & Beverage solution →
Fine Chemicals

Fine Chemicals Processing: Precision Milling and Controlled Synthesis Support

Bead mills, dispersers and reactors for pigments, dyes, catalysts, speciality intermediates and performance chemicals, with explosion-proof designs and closed transfer.
View the Fine Chemicals solution →
Mineral Processing

Mineral Processing Equipment: Wet Grinding for Calcium Carbonate, Talc and Kaolin

Large-volume bead mills and attrition mills for calcium carbonate, talc, kaolin, barite and other industrial minerals, with wear-resistant liners and efficient separation.
View the Mineral Processing solution →
Construction Materials

Construction Materials Mixing Equipment: Dry Mortar, Putty, Tile Adhesive and Plaster

Powder blenders for dry mortar, tile adhesive and plaster, and high-viscosity mixers for putty and paste products, selected by material form, batch size and dust requirements.
View the Construction Materials solution →
Pigments

Pigment Processing Equipment: Wetting, Grinding and Dispersion

High-speed dispersers, bead mills and basket mills for pigment wetting, fine grinding and colour-strength development, serving organic, inorganic and effect pigments from lab to bulk production.
View the Pigment solution →
Dyestuffs

Dyestuff Processing Equipment: Dispersion and Colourant Paste Production

Bead mills and high-shear mixers for liquid dyes, dye intermediates and colourant pastes, with controlled temperature and closed transfer for consistent shade and stable dispersion.
View the Dyestuff solution →
Liquid Fertilisers

Liquid Fertiliser Production Equipment: Dissolution, Suspension and Filling

Mixing kettles, agitators and bead mills for liquid fertiliser dissolution, suspension and filling, handling NPK blends, micronutrient solutions and suspension concentrates with consistent homogeneity.
View the Liquid Fertiliser solution →
Cosmetics

Cosmetics Manufacturing Equipment: Emulsification, Homogenisation and Mixing

Vacuum emulsifiers, homogenisers and planetary mixers for creams, lotions, serums and colour cosmetics, with jacketed vessels and sanitary fittings for stable emulsions and repeatable batches.
View the Cosmetics solution →
Daily Chemicals

Daily Chemical Production Equipment: High-Shear Mixing and Emulsification

High-shear mixers, vacuum emulsifiers and homogenisers for shampoos, detergents, liquid soaps and household cleaners, with CIP-compatible vessels and scalable batches from pilot to full production.
View the Daily Chemical solution →

TECHNICAL GUIDES

Go deeper: guides and pillars

PILLAR

Bead Mills: Wet Grinding Guide

Chamber types, grinding media and selection for fine and sub-micron wet grinding.
Read the guide →
PILLAR

Industrial Dispersers Guide

Single and dual-shaft dispersers, impeller choice and the premix stage before milling.
Read the guide →
COMPARISON

Bead Mill vs Ball Mill

How agitated-media milling differs from ball milling — and which fits your product.
Read the comparison →
LINE

Paint & Coating Production Line

Dispersion, milling, letdown and filling configured into one coating production route.
View the line →
Since 2006Equipment manufacturing experience
ISO 9001Held by Jiangyin partner (FAP24Q0075R0)
CECertified for the European market
80+Countries supplied
3-YearEquipment warranty

FAQ

Process solution questions

Is a process solution just a package of machines?

No. A solution is an equipment route sized to one product family: material, viscosity, target fineness and capacity decide each step, and every machine in the route is justified by the step before and after it.

How do I know which industry route fits my product?

Match the material behaviour, viscosity, target fineness and capacity first. Many products share the same wet chain — premix, grind, let down, filter and fill — and the industry page only changes the design pressure around it. Hybrid routes are common.

Can I start with one machine and expand into a full line later?

Yes. Many plants start with dispersion and pre-mix, add a bead mill for fineness, then add let-down, filtration and filling as volume grows. Plan utilities, floor space and controls for expansion from the start.

What fineness and capacity can a line cover?

Fineness runs from sub-micron to around 100 microns depending on the grinding stage, and capacity is sized to your batch or throughput target, from laboratory scale to production lines with multi-thousand-litre batches.

Do you support ATEX or hazardous-area requirements?

Yes. We can supply to ATEX requirements for classified areas, including suitable motors, grounding, sealed electrical cabinets and solvent-safe designs for hazardous-area processing.

How long does it take to specify and deliver a line?

Standard machines typically ship in around 30 days. Custom lines usually take 30 to 45 working days after approved drawings; complex or hazardous-area projects take longer after process review.

START A TECHNICAL DISCUSSION

Tell us about your material and your target fineness.

Share your target capacity, material behaviour and process constraints so the equipment path can be defined with you.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp