DYESTUFF · WET GRINDING · DISPERSION · SHADE CONTROL

Dyestuff and Dye Dispersion Equipment: Bead Mills and High-Shear Mixers

POLYC MACHINE supplies high-speed dispersers, horizontal and pin-type bead mills and filtration systems for liquid dyes, dye intermediates and colourant pastes, with stainless-steel or corrosion-resistant wetted parts matched to the chemistry.

Dyes require fine, stable dispersion to achieve uniform shade and light fastness in liquid systems. POLYC MACHINE supplies high-speed dispersers, horizontal and pin-type bead mills and filtration systems for liquid dyes, dye intermediates and colourant pastes, with stainless-steel or Hastelloy wetted parts for corrosive dye chemistries.

POLYC MACHINE dyestuff dispersion route diagram: four stages from dye wetting and premixing through bead milling for fine shade development, standardisation of the colourant paste, then filtration and filling of liquid dyes.
Typical dyestuff route: premixing wets the dye powder into the vehicle, bead milling develops full shade and fine particle size, a mixing stage standardises strength, and filtration removes oversize material before filling. Chemistry sets the wetted-part material.

TYPICAL PRODUCTION ROUTE

From raw material to finished product.

01

Dye dissolution and premixing

High-shear dispersers wet and dissolve dye stuffs into the carrier liquid, breaking soft agglomerates before fine grinding.

02

Wet grinding for uniform shade

Bead mills reduce dye agglomerates to a narrow particle-size distribution, improving shade reproducibility and reducing filtration load.

03

Filtration and stabilisation

Bag or cartridge filtration removes oversize particles and undissolved matter. Closed transfer protects operators handling concentrated dye streams.

04

Filling and packaging

Load-cell or piston fillers handle 1 to 200 kg containers with accurate weight control for batch traceability.

RECOMMENDED EQUIPMENT

Equipment for dyestuff processing.

View all equipment →
PZM Series Submersible Basket Mill for ink, paint and coatings wet grinding - front view - side view
PZM / 30 - 1,500 L

Basket Mill

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Planetary mixer for high viscosity slurry, sealants and adhesives up to 1,500,000 cP
PMX / 2 - 1,000 L

Planetary Mixer

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Concentric double shaft mixer for high viscosity slurry, pastes and resins with scraper agitator - side view
PCM / 150 - 1,500 L

Concentric Double Shaft Mixer

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly dual shaft mixer for sealants, adhesives and high viscosity materials - side view
150 - 900 L

Butterfly Double Shaft Mixer

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L Basket Mill For Pigment - Grinding & Milling equipment for Coatings - front view
1,000 L

1000L Basket Mill For Pigment

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

Low Speed Mixing Vessel (PMK Series)
500 - 15,000 L

Low Speed Mixing Vessel (PMK Series)

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Laboratory planetary mixer 30L for small batch R&D of high viscosity materials
PMX-02L, PMX-05L, PMX-30L (custom), PMX-100L, PMX-200L, PMX-500L, PMX-1000L / 2 - 1,000 L

Laboratory Planetary Mixer 30L (PMX Series)

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes and pigments production line for colorant manufacturing
Custom throughput

Dyes & Pigments Production Line

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling

IN-DEPTH GUIDANCE

Equipment for liquid dyes and dye intermediates

Dyes need fine, stable dispersion to reach uniform shade and consistent light fastness in liquid systems. A high-speed disperser wets the powder into the vehicle, then a horizontal bead mill or vertical pin-type bead mill reduces agglomerates to the target particle size.

Where a plant makes many shades, a basket mill limits cross-contamination because grinding, dispersion and the batch vessel are one unit. A complete dyes and pigments production line adds premixing, standardisation, filtration and filling in one coordinated flow.

Controlling shade, strength and stability

Shade development depends on dispersion energy: media size, tip speed, residence time and pass count. Chamber fill is normally 60-80 per cent of chamber volume. Fine zirconia media produces narrower distributions for transparent and high-strength dyes; our bead mill selection guide and the production line guide set out the same sizing logic used for printing inks.

Because many dye chemistries are corrosive, wetted parts are specified in 316L stainless steel or a suitable alloy rather than carbon steel. Fine chemical processing covers the material and containment choices in more detail.

Typical capacities and configurations

Laboratory mills establish the recipe on small samples, and production units scale from those results. The table below gives the usual selection logic; final sizing follows a sample trial, because dye hardness and solubility vary widely between chemistries.

Filtration, cleaning and changeover

Bag or cartridge filtration removes oversize particles and gel before the dye is filled into pails or drums. Polished internals, quick-release connections and dedicated media sets reduce cleaning time between shades. Bag filters and filling machines are selected to the pack size and the required weight accuracy.

From laboratory trial to a production line

We normally begin with a laboratory basket mill to fix the grinding recipe, then scale to production. This project example shows how a full route is laid out from pigment grinding to filling. Browse our case studies or send your dye sample for testing and our engineers will propose a configuration.

Why manufacturers work with POLYC MACHINE

POLYC MACHINE has designed and built wet grinding, dispersion and mixing equipment since 2006. We work to ISO 9001 quality procedures, supply CE-marked machinery and provide a 3-year warranty on complete machines, together with free installation guidance and operator training. Equipment is supplied to customers in more than 80 countries. Standard machines commonly ship within 30 days; customised lines take longer. Read about our manufacturing capability or check our frequently asked questions before requesting a quotation.

Indicative equipment selection for dyestuff processing

Process dutyRecommended equipmentTypical rangeSelection driver
Dye wetting and premixHigh-speed disperser50-5,000 L batchPowder loading, solubility
Fine shade developmentHorizontal or pin-type bead mill0.6-1.6 mm zirconia mediaTarget shade and transparency
Many shades per plantBasket millSingle-vessel batchesCleaning time, cross-contamination
Corrosive dye chemistry316L or alloy wetted partsSpecified per formulationChemical compatibility
StandardisationMixing kettleMatched to millbaseStrength adjustment, additive order
Filtration and fillingBag filter and filling machine1-30 kg packsGel removal, weight accuracy

FREQUENTLY ASKED QUESTIONS

Planning a dyestuff equipment project.

What equipment is used for dye dispersion?

A route typically combines a high-shear disperser for wetting, a bead mill for fine grinding and filtration before filling. The exact configuration depends on dye solubility and target fineness.

Can your equipment handle corrosive dye chemistries?

Standard wetted parts are 304 or 316 stainless steel. For aggressive dye intermediates we offer Hastelloy C-276 or titanium construction. Chemical compatibility should be specified during quotation.

What fineness is achievable for dyes?

Pin-type bead mills with 0.3 to 0.8 mm zirconia media reach sub-micron distributions for transparent dyes. Final size depends on the dye and carrier and should be confirmed by trial.

Do you support closed systems for dye handling?

Yes. Closed charging, milling and transfer with nitrogen inerting and contained discharge are available for hazardous or high-odour dye streams.

How do I specify a dye dispersion line?

Provide the dye type and solubility, carrier solvent or water, target fineness, batch size and any hazardous-area or corrosion requirements so we can propose the right materials and configuration.

Which bead mill suits liquid dyes best?

It depends on viscosity and how many shades you run. A horizontal bead mill gives continuous high throughput for a single product; a pin-type mill delivers higher energy density for hard agglomerates; a basket mill is easiest to clean between shades. We confirm the choice with a sample test.

How do you avoid corrosion in dye processing?

Standard wetted parts are 304 or 316L stainless steel. For aggressive dye intermediates we specify corrosion-resistant alloys, compatible seals and ceramic or polymer contact parts where needed. Share the formulation and pH range during quotation so the materials can be matched.

Can the same line handle dyes and pigment pastes?

Often yes, with dedicated media and a validated cleaning routine. Pigment pastes are usually more viscous and need different shear, so the disperser and mill settings change. A complete dyes and pigments production line is designed around the widest formulation range you expect.

What data is needed for a dyestuff equipment quotation?

Send the dye class and safety data, solvent or water base, viscosity, target particle size or shade strength, batch size or hourly throughput, and any corrosion or hazardous-area constraints. We then size the mill, media and filtration and arrange a trial on your sample.

START A TECHNICAL DISCUSSION

Tell us about your dyestuff process.

Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp