SOLUTIONS BY INDUSTRY

Color Paste Manufacturing Equipment: Pigment Paste and Tinting Systems

Color pastes and pigment dispersions demand high colour strength, fineness and stability with low viscosity change over time. POLYC MACHINE supplies high-shear dispersers, bead mills and three-roll mills for pigment paste, tinting paste and colour masterbatch production across coatings, plastics and construction.

TYPICAL PRODUCTION ROUTE

From raw material to finished product.

01

Pigment wetting and let-down

High-shear dispersers wet out pigment into resin or solvent, breaking agglomerates before fine grinding.

02

Fine grinding

Bead mills or three-roll mills reduce pigment agglomerates to the target fineness for colour strength, gloss and transparency.

03

Stabilisation and viscosity control

Dispersants and rheology modifiers are added under controlled shear to stabilise the paste and set application viscosity.

04

Filtration and filling

Bag or cartridge filtration removes oversize particles before filling into pails, drums or intermediate bulk containers.

RECOMMENDED EQUIPMENT

Equipment for color pastes processing.

View all equipment →
PZM Series Submersible Basket Mill for ink, paint and coatings wet grinding - front view - side view
PZM / 30 - 1,500 L

Basket Mill

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Planetary mixer for high viscosity slurry, sealants and adhesives up to 1,500,000 cP
PMX / 2 - 1,000 L

Planetary Mixer

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Concentric double shaft mixer for high viscosity slurry, pastes and resins with scraper agitator - side view
PCM / 150 - 1,500 L

Concentric Double Shaft Mixer

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly dual shaft mixer for sealants, adhesives and high viscosity materials - side view
150 - 900 L

Butterfly Double Shaft Mixer

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L Basket Mill For Pigment - Grinding & Milling equipment for Coatings - front view
1,000 L

1000L Basket Mill For Pigment

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

Low Speed Mixing Vessel (PMK Series)
500 - 15,000 L

Low Speed Mixing Vessel (PMK Series)

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Laboratory planetary mixer 30L for small batch R&D of high viscosity materials
PMX-02L, PMX-05L, PMX-30L (custom), PMX-100L, PMX-200L, PMX-500L, PMX-1000L / 2 - 1,000 L

Laboratory Planetary Mixer 30L (PMX Series)

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes and pigments production line for colorant manufacturing
Custom throughput

Dyes & Pigments Production Line

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling

FREQUENTLY ASKED QUESTIONS

Planning a color pastes equipment project.

What equipment is needed for color paste production?

A route combines a high-shear disperser for pigment wetting, a bead mill or three-roll mill for fine grinding, and filtration and filling equipment. Three-roll mills suit high-viscosity pigment pastes.

Bead mill or three-roll mill for pigment paste?

Bead mills suit lower-viscosity pastes and high throughput; three-roll mills handle very high-viscosity pigment concentrates. The choice depends on the paste rheology and target fineness.

How is colour strength maximised?

Consistent dispersion energy - fixed bead charge, tip speed and pass count - plus proper dispersant selection maximises colour strength and stability.

What fineness is needed for color pastes?

Most decorative and industrial pastes target a Hegman gauge of 6 to 7; high-gloss and transparent systems may need finer dispersion. Final target depends on the application.

START A TECHNICAL DISCUSSION

Tell us about your color pastes process.

Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp