
Quick answer: Understand how emulsifiers stabilise emulsions and which high-shear mixers and emulsifying kettles deliver small, stable droplets.
Emulsifiers stabilise an emulsion by lowering interfacial tension and building a barrier around droplets; high-shear mixers and emulsifying kettles make the droplets small. Vacuum and jacketed cooling protect heat-sensitive products.
An emulsion is only stable if the dispersed droplets are small enough and held apart. Emulsifiers - surfactants and, mechanically, high-shear devices - are what make that happen. Buyers searching "how emulsifiers stabilise emulsion" usually want both the chemistry (why droplets do not coalesce) and the equipment (how droplets are made small). This guide covers both, and the mixing machines that deliver a stable product.
Key takeaways
- Emulsifiers stabilise by lowering interfacial tension and building a barrier around droplets
- Mechanical high shear makes droplets small; chemistry keeps them apart
- Droplet size, not just formulation, decides emulsion stability and feel
- High-shear emulsifying kettles and inline rotor-stators are the standard machines
- Vacuum and jacketed cooling protect heat-sensitive emulsions
Why emulsions break and how emulsifiers stop it
An emulsion is one liquid dispersed as droplets in another (oil in water, or water in oil). Left alone, droplets collide and merge because the interfacial tension pulls them back together. An emulsifier lowers that tension and packs at the interface, creating a mechanical or electrostatic barrier so droplets resist coalescence. The result is a stable, uniform product rather than separated layers.
The two jobs: make droplets small, keep them apart
Mechanical shear makes the droplets small; chemistry keeps them small. A rotor-stator or homogeniser mechanically subdivides the dispersed phase, while the emulsifier (lecithin, polysorbate, gum, or a formulated surfactant system) stabilises the newly created interface. If you only do one, the emulsion either has coarse droplets or drifts out of stability over time.
Equipment that stabilises emulsions
A high-shear emulsifying kettle combines a high-speed rotor-stator with slow scraping agitation and, often, vacuum. POLYC emulsifying/homogenisation kettles cover 1,000-5,000 L, with homogeniser speed up to 3,000 rpm (about 1,450 rpm on larger models) and typical droplet size of 1-20 micron depending on formulation. Vacuum down to about 1-30 mbar removes entrained air, and a jacketed vessel controls temperature for heat-sensitive systems.
Emulsifying equipment selection
| Machine | Action | Typical output | Best fit |
|---|---|---|---|
| High-shear emulsifying kettle | Rotor-stator + scraping agitation, vacuum | 1-20 micron droplets | Cosmetics, creams, pharma emulsions |
| Inline disperser / rotor-stator | Continuous single-pass shearing | 1-40 m3/h throughput | Continuous emulsion lines |
| Triple-shaft mixer | Dispersing + stirring + scraping | Up to ~300,000 cP | Viscous emulsions and pastes |
| Planetary mixer | Wall-scraping planetary blades | Up to 1,500,000 cP | Very high-viscosity bodies |
Droplet size and what it controls
Smaller, narrower droplet-size distribution gives a smoother feel, better stability and often a whiter or more uniform appearance. That is why homogeniser speed and pass count matter: they set the droplet size. But pushing shear past what the emulsifier system can stabilise just generates heat and can even break the emulsion, so the equipment and formulation are tuned together.
Process and hygiene factors
For cosmetic and pharmaceutical emulsions, cleanability and containment join the technical criteria. Polished 316L contact surfaces, vacuum charging and CIP-capable designs are specified alongside capacity. Where the product is solvent-based, solvent recovery and explosion-proof electricals must be specified at the same time as the emulsifier.
Selection checklist
- What droplet size and stability does the product require?
- Is the duty batch (kettle) or continuous (inline)?
- What viscosity, and does it need a triple-shaft or planetary machine?
- Are vacuum, jacketed cooling and polished finishes needed?
- Does the emulsifier system match the shear the machine will apply?
Frequently asked questions
How do emulsifiers stabilise an emulsion?
Emulsifiers lower the interfacial tension between the two liquids and pack at the droplet surface, forming a mechanical or electrostatic barrier that stops droplets from colliding and coalescing. Small mechanical shear plus this chemical barrier gives a stable emulsion.
What makes emulsion droplets small?
High-shear devices - a rotor-stator, homogeniser or inline disperser - mechanically subdivide the dispersed phase into small droplets. The emulsifier then stabilises those droplets so they do not merge back together.
What equipment is used to make stable emulsions?
High-shear emulsifying kettles with a rotor-stator and vacuum, inline rotor-stator dispersers for continuous lines, and triple-shaft or planetary mixers for viscous bodies. POLYC emulsifying kettles give droplet sizes of about 1-20 micron.
Does droplet size affect emulsion stability?
Yes. Smaller, narrower droplet-size distribution improves stability, smoothness and appearance. Homogeniser speed and pass count set droplet size, but shear must stay within what the emulsifier system can stabilise.
Is an emulsifying kettle better than an inline disperser?
A kettle suits batch production with vacuum and scraping for creams and pharma emulsions; an inline disperser suits continuous, high-throughput lines at 1-40 m3/h. The choice follows batch size and changeover frequency.
Why use vacuum in emulsification?
Vacuum removes air entrained during high-shear mixing, which improves product uniformity and shelf stability and prevents foam in the final emulsion, especially for cosmetics and pharmaceuticals.
Related POLYC equipment
Also covered in this guide: how emulsifiers stabilise emulsion, high shear emulsifier, emulsifying kettle.
Source: POLYC MACHINE — Shanghai Polyc Technology Co., Ltd. (polyc.site), manufacturer of wet grinding, dispersion and mixing equipment for coatings, inks, adhesives and battery materials since 2006.
Explore POLYC MACHINE bead mills, high-speed dispersers, mixers and reactors for coatings, inks, paints and battery slurry. Request a quote for your process line.
Relevant POLYC MACHINE equipment
Related technical guides
Standards referenced
Method references used by process engineers when specifying and verifying the operations described in this guide.
- ISO 1524:2020 — Paints, varnishes and printing inks — Determination of fineness of grind
- ISO 13320:2020 — Particle size analysis — Laser diffraction methods
- ISO 8780-1:1990 — Pigments and extenders — Methods of dispersion for assessment of dispersion characteristics (Part 1: Introduction)
- ISO 3219 — Plastics — Determination of viscosity using a rotational viscometer
