POLYC finished and delivered an order of a PZM basket mill and a high-shearing emulsifier to an Algerian customer on June 11. The PZM basket mill is easy to clean with minimal residue when changing colors, making it ideal for small-batch, multi-color production. POLYC has built dispersion equipment since 2001.
A Hot-Sale Basket Mill for Algeria
The PZM basket mill combines dispersion and grinding in one machine, multi-purpose and easy to clean. It is widely used in paint and coating, ink and pesticide industries and reaches a fineness of 5-20 micron.
Why Customers Choose the PZM
- Basket Mill for flexible, small-batch, multi-color grinding.
- Laboratory Basket Mill for R&D and trials.
- 1000L Basket Mill for Pigment for larger batches.
- High-Shearing Emulsifier Kettle for homogenization.
- Pin-Type Bead Mill for continuous nano grinding.
Choosing Between Basket and Bead Mills
Basket mills shine for fast color changes; bead mills suit continuous, high-throughput lines. Our basket vs bead mill guide, horizontal vs basket comparison and basket mill specs guide help you decide.
| Machine | Best for | Fineness |
|---|---|---|
| PZM Basket Mill | Small-batch, multi-color | 5-20 micron |
| Pin-type bead mill | Continuous lines | Down to nano |
About the Delivered Basket Mill
The Basket Mill shipped in this order is only the visible part of a delivery. Before it leaves the factory, POLYC builds and test-runs each machine against the customer's specified product and fineness, records the acceptance run, and packs the spare-parts kit the line will need in its first year. That factory acceptance step is what turns a piece of steel into a machine the customer can switch on and run, and the recorded trial becomes the baseline the customer checks against during commissioning.
Commissioning and Long-Term Support
Delivery is followed by commissioning: alignment, electrical connection, a supervised first production run, and operator training. POLYC provides a 3-year warranty on core machines and keeps a spare-parts program so a worn seal or separator does not stop a line for weeks. With more than 8,000 systems delivered to over 60 countries since 2001, the support network is built around keeping the customer's line running, not just shipping the order, and most issues are resolved remotely before a service visit is booked.
Spare Parts Worth Stocking
For any grinding or mixing machine, the parts that wear are predictable: seals, separator screens, mixing shafts and bearings. POLYC ships a first-year kit with each order and advises customers on the small list of items to keep on the shelf so a routine wear item never becomes an emergency. This is the difference between a planned, low-cost replacement and an unplanned, line-stopping failure.
Matching the Machine to the Product
Whether the order is a single disperser or a full line, POLYC's engineers start from the customer's formulation, target fineness and daily throughput, then specify the machine that fits. This is why a delivered bead mill or basket mill arrives already matched to the product it will actually grind, rather than to a catalog number, and why the commissioning run usually meets the quoted fineness on the first attempt.
How to Choose the Right Size
Sizing is not guessing the largest tank that fits the room. POLYC sizes the delivered machine from the daily volume and the most demanding product in the customer's range, then confirms it on the trial run. A machine sized for the average product will stall on the hard one, while one sized for the hardest keeps the whole plan running. The acceptance record from the factory trial is the evidence the customer uses to confirm the size was right before the machine even ships.
Receiving and Installing the Machine
On arrival, the customer checks the machine against the packing list and the factory test report, then places it on the prepared foundation with the utility connections POLYC specified earlier. Doing the civil and utility works in parallel with manufacturing is what keeps the installation short; a machine that arrives to a finished, connected bay is running within days, not weeks, and the commissioning team can focus on process tuning instead of wiring.
Take the Next Step with POLYC
If High-Quality Basket Mill Shipped: POLYC Hot-Sale Dispersion Equipment is relevant to your operation, POLYC's engineering team can review your product, target fineness and throughput and propose a machine or line matched to your process. With more than 8,000 systems delivered to over 60 countries since 2001 and a 3-year warranty on core machines, the recommendation is backed by a track record, not just a brochure.
Frequently Asked Questions
What is a basket mill?
A wet mill that integrates dispersion and grinding in one basket, easy to clean between colors, ideal for small batches.
Basket mill or bead mill?
Choose a basket mill for fast color changes and small batches; a bead mill for continuous, high-throughput grinding. See the comparison.
What fineness does the PZM reach?
5-20 micron, suitable for paint, coating, ink and pesticide applications.
Talk to a POLYC Engineer
POLYC MACHINE has delivered 8,000+ systems to 60+ countries since 2001, with a 3-Year Warranty. Request your PZM or bead mill quote.