SOLUTIONS BY INDUSTRY

Emulsion Production Equipment: Polymerization, Dispersion and Stabilization

Emulsions - acrylic, styrene-acrylic, VAE and polyurethane dispersions - require controlled polymerization, cooling and stabilization. POLYC MACHINE supplies reactors, high-shear emulsifiers and dispersion systems for emulsion polymerization and emulsion product manufacturing, with explosion-proof and corrosion-resistant options.

TYPICAL PRODUCTION ROUTE

From raw material to finished product.

01

Emulsion polymerization

Glass-lined or stainless reactors with anchor or turbine agitation and jacket temperature control run seeded or continuous polymerization for stable particle size.

02

High-shear emulsification

Inline or batch high-shear emulsifiers form stable droplets for emulsions and polymer dispersions with controlled particle size.

03

Post-polymerization treatment

Neutralization, filtration and deaeration adjust pH, remove grit and improve clarity and stability.

04

Cooling, storage and transfer

Heat exchangers and agitated tanks handle cooling and storage; closed transfer protects operators and product quality.

RECOMMENDED EQUIPMENT

Equipment for emulsions processing.

View all equipment →
Planetary mixer for high viscosity slurry, sealants and adhesives up to 1,500,000 cP
PMX / 2 - 1,000 L

Planetary Mixer

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Emulsifying/homogenization kettle - Reactors & Kettles equipment for Emulsions - view 2
PEK / 1,000 - 5,000 L

Emulsifying/homogenization kettle

An emulsifying and homogenisation kettle combines vacuum-rated vessel agitation with a high-shear homogeniser to produce stable fine emulsions in one

PZM Series Submersible Basket Mill for ink, paint and coatings wet grinding - front view - side view
PZM / 30 - 1,500 L

Basket Mill

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Concentric double shaft mixer for high viscosity slurry, pastes and resins with scraper agitator - side view
PCM / 150 - 1,500 L

Concentric Double Shaft Mixer

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly dual shaft mixer for sealants, adhesives and high viscosity materials - side view
150 - 900 L

Butterfly Double Shaft Mixer

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L Basket Mill For Pigment - Grinding & Milling equipment for Coatings - front view
1,000 L

1000L Basket Mill For Pigment

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

Low Speed Mixing Vessel (PMK Series)
500 - 15,000 L

Low Speed Mixing Vessel (PMK Series)

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Laboratory planetary mixer 30L for small batch R&D of high viscosity materials
PMX-02L, PMX-05L, PMX-30L (custom), PMX-100L, PMX-200L, PMX-500L, PMX-1000L / 2 - 1,000 L

Laboratory Planetary Mixer 30L (PMX Series)

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes and pigments production line for colorant manufacturing
Custom throughput

Dyes & Pigments Production Line

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling

Pin type horizontal bead mill for ultra-fine grinding of ink, paint and battery materials - side view
PZB / 0.5 - 1,000 L

Pin Type Bead Mill

Horizontal pin-type bead mill for nanometer-range grinding, supporting media down to 0.2mm with centrifugal separation and force cooling.

FREQUENTLY ASKED QUESTIONS

Planning a emulsions equipment project.

What reactor is used for emulsion polymerization?

Glass-lined or 316L stainless reactors with anchor or turbine agitation and jacket temperature control are commonly evaluated. The choice depends on the chemistry, temperature range and corrosion requirements.

Can you handle continuous emulsion production?

Yes. Continuous emulsion lines use staged reactors, inline emulsifiers and controlled feed for steady output. Batch routes are simpler for multiple formulations.

What explosion-proof options are available?

Explosion-proof motors and controls meet ATEX/IECEx for solvent-borne stages. Water-based emulsion lines can use standard electricals.

How is emulsion stability controlled?

Stable particle size from controlled agitation and emulsification, plus proper surfactant and pH management, determines shelf stability. We can review the formulation constraints during quotation.

START A TECHNICAL DISCUSSION

Tell us about your emulsions process.

Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp