SOLUTIONS BY INDUSTRY

Putty Production Equipment: Wall, Car and Industrial Filler Lines

Putty and fillers - interior and exterior wall putty, car body filler and industrial paste - require high-viscosity mixing, dispersion and degassing for smooth, sag-resistant application. POLYC MACHINE supplies planetary mixers, dual-shaft dispersers and vacuum kneaders for putty and filler production, with cartridge and pail filling options.

TYPICAL PRODUCTION ROUTE

From raw material to finished product.

01

Powder and resin blending

Planetary and dual-shaft mixers wet out calcium carbonate, talc and resin into a uniform paste with wall scraping for high-viscosity batches.

02

Pigment and additive dispersion

High-shear dispersers incorporate titanium dioxide, colourants and thickeners for consistent shade and rheology.

03

Vacuum degassing

Vacuum mixing removes air to improve smoothness, reduce pinholes and stabilise shelf life.

04

Filling and packaging

Piston fillers load cartridges, tins and pails with accurate weight control; cartridge lines serve the automotive refinish market.

RECOMMENDED EQUIPMENT

Equipment for putty processing.

View all equipment →
PZM Series Submersible Basket Mill for ink, paint and coatings wet grinding - front view - side view
PZM / 30 - 1,500 L

Basket Mill

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Planetary mixer for high viscosity slurry, sealants and adhesives up to 1,500,000 cP
PMX / 2 - 1,000 L

Planetary Mixer

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Concentric double shaft mixer for high viscosity slurry, pastes and resins with scraper agitator - side view
PCM / 150 - 1,500 L

Concentric Double Shaft Mixer

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly dual shaft mixer for sealants, adhesives and high viscosity materials - side view
150 - 900 L

Butterfly Double Shaft Mixer

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L Basket Mill For Pigment - Grinding & Milling equipment for Coatings - front view
1,000 L

1000L Basket Mill For Pigment

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

Low Speed Mixing Vessel (PMK Series)
500 - 15,000 L

Low Speed Mixing Vessel (PMK Series)

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Laboratory planetary mixer 30L for small batch R&D of high viscosity materials
PMX-02L, PMX-05L, PMX-30L (custom), PMX-100L, PMX-200L, PMX-500L, PMX-1000L / 2 - 1,000 L

Laboratory Planetary Mixer 30L (PMX Series)

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes and pigments production line for colorant manufacturing
Custom throughput

Dyes & Pigments Production Line

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling

FREQUENTLY ASKED QUESTIONS

Planning a putty equipment project.

What equipment is used for putty production?

A typical putty line uses a planetary or dual-shaft mixer for high-viscosity blending, a high-shear disperser for pigments, a vacuum system for degassing and a filling machine for cartridges or pails.

Can one line make both wall putty and car body filler?

Yes, with appropriate tooling and cleaning. Wall putty is usually water-based; car body filler is polyester-based and needs solvent-safe, moisture-controlled handling.

Why vacuum degassing for putty?

Air entrapment causes pinholes and uneven application. Vacuum mixing improves surface finish and storage stability.

What pack sizes are supported?

Cartridges (standard automotive), 1 to 20 kg tins and pails, and bulk IBC for construction putty. Multi-head filling increases throughput.

START A TECHNICAL DISCUSSION

Tell us about your putty process.

Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp