SOLUTIONS BY INDUSTRY

Paint Manufacturing Equipment: Dispersion, Milling and Tinting

Architectural and decorative paints require stable pigment dispersion, controlled fineness and reproducible colour. POLYC MACHINE supplies high-speed dispersers, bead mills, basket mills and filling systems for emulsion paints, industrial finishes and tinting systems, from water-based to solvent-borne formulations.

TYPICAL PRODUCTION ROUTE

From raw material to finished product.

01

Pigment wetting and dispersion

High-speed dispersers with saw-tooth discs wet out TiO2, extenders and colourants before milling. Disc diameter is sized at roughly one third of vessel diameter for optimal shear and circulation.

02

Wet grinding and fineness control

Bead mills reduce pigment agglomerates to the target fineness. Zirconia media (0.6 to 1.6 mm) delivers narrow particle-size distribution for consistent opacity and colour strength.

03

Letdown and tinting

Planetary or butterfly mixers blend the millbase with resin, solvent and additives under controlled shear. Automated tinting systems add colourants for batch-to-batch consistency.

04

Filtration and filling

Bag or cartridge filtration removes oversize particles before filling. Piston or load-cell fillers handle 1 to 30 kg pails and drums with accurate weight control.

RECOMMENDED EQUIPMENT

Equipment for paints processing.

View all equipment →
PZM Series Submersible Basket Mill for ink, paint and coatings wet grinding - front view - side view
PZM / 30 - 1,500 L

Basket Mill

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Planetary mixer for high viscosity slurry, sealants and adhesives up to 1,500,000 cP
PMX / 2 - 1,000 L

Planetary Mixer

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Concentric double shaft mixer for high viscosity slurry, pastes and resins with scraper agitator - side view
PCM / 150 - 1,500 L

Concentric Double Shaft Mixer

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly dual shaft mixer for sealants, adhesives and high viscosity materials - side view
150 - 900 L

Butterfly Double Shaft Mixer

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L Basket Mill For Pigment - Grinding & Milling equipment for Coatings - front view
1,000 L

1000L Basket Mill For Pigment

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

Low Speed Mixing Vessel (PMK Series)
500 - 15,000 L

Low Speed Mixing Vessel (PMK Series)

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Laboratory planetary mixer 30L for small batch R&D of high viscosity materials
PMX-02L, PMX-05L, PMX-30L (custom), PMX-100L, PMX-200L, PMX-500L, PMX-1000L / 2 - 1,000 L

Laboratory Planetary Mixer 30L (PMX Series)

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes and pigments production line for colorant manufacturing
Custom throughput

Dyes & Pigments Production Line

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling

FREQUENTLY ASKED QUESTIONS

Planning a paints equipment project.

What equipment is needed for a paint production line?

A typical line includes a high-speed disperser for pigment wetting, a bead mill or basket mill for grinding, a mixing tank for letdown, a filtration unit and a filling machine. Capacity is set by the slowest unit, usually the mill.

Can the same equipment handle water-based and solvent-based paints?

Yes. Wetted parts in 304 or 316 stainless steel handle both systems. Explosion-proof motors and controls are required for solvent-based formulations.

What bead size is recommended for paint?

For most architectural and industrial paints, 1.0 to 1.4 mm zirconia beads work well. For high-gloss and tinting systems, 0.6 to 0.8 mm beads produce finer particle sizes with narrower distribution.

How do I size a disperser for my batch volume?

Motor power is roughly 0.1 to 0.15 kW per liter of millbase for medium-viscosity paints. Disc diameter should be about one third of vessel diameter.

START A TECHNICAL DISCUSSION

Tell us about your paints process.

Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.

Request a Quote →
Get a Quote →WhatsApp
Chat on WhatsApp