Cathode and anode slurry mixing
High-shear dispersers blend active material, binder and conductive additive into a solvent or water-based carrier under controlled shear and temperature.
SOLUTIONS BY INDUSTRY
Electronic slurries - lithium battery electrode slurries, MLCC dielectric pastes and conductive inks - require iron-free, contamination-controlled wet processing with tight particle-size and viscosity control. POLYC MACHINE supplies nano bead mills, high-shear dispersers and vacuum mixers for cathode, anode and functional electronic slurries.
TYPICAL PRODUCTION ROUTE
High-shear dispersers blend active material, binder and conductive additive into a solvent or water-based carrier under controlled shear and temperature.
Nano bead mills with ceramic chambers reduce agglomerates to the target particle size for uniform coating and conductivity.
Vacuum mixing removes entrapped air to improve coating uniformity and reduce defects in electrode and paste films.
Ceramic or polymer contact parts, closed transfer and clean handling protect slurry purity for battery and electronic applications.
RECOMMENDED EQUIPMENT

PZM Basket Mill: Submersible Wet Grinding for Paint, Ink, Pigment & Latex Production

Planetary mixer for viscosities up to 1,500,000 cP, combining reaction, mixing and dispersion in one vessel. Working capacity: 2-1,000 L.

Scraper agitator with concentric high-speed disperser; frame, half-frame and multi-disc options. Capacity: 100-12,000 L.

Butterfly agitator plus high-speed disperser for efficient shear mixing of high-viscosity pastes and sealants. Capacity: 100-12,000 L.

1000L basket mill for large-batch pigment grinding, with dispersion and grinding integrated in one basket.

A PMK low-speed mixing vessel provides gentle, large-volume agitation for blending, storage and holding duties where product must stay uniform without

Our PMX Laboratory Planetary Mixer 30L is a bench-scale planetary mixer designed for R&D, small-batch trials and pilot production. The orbiting and ro

Dyes & Pigments Production Line: Bead Milling, Dispersion, Filtration and Filling
FREQUENTLY ASKED QUESTIONS
A route typically combines high-shear dispersion for mixing, nano bead milling for fine active and conductive powders, vacuum deaeration and controlled transfer to coating. Contact parts are selected for iron-free, contamination-controlled operation.
We use ceramic or polymer wetted parts, zirconia media and closed transfer where required. Material compatibility and contamination limits should be specified during quotation.
Yes. The same disperser and mill platform handles NMC, LFP, graphite and silicon-based slurries by changing media size, chamber and process parameters.
Nano bead mills reach sub-micron to nanoscale particle sizes depending on the active material and media. Final targets are set by the coating and conductivity requirements.
START A TECHNICAL DISCUSSION
Share your target capacity, material behaviour, and process constraints. Our engineering team will help define the right equipment path.
Request a Quote →